Wastewater-based SARS-CoV-2 environmental monitoring for Piedmont, Italy.

The experience gained over the last hundred years clearly indicates that two groups of viruses represent the main risk for the development of highly transmissible epidemics and pandemics in the human species: influenza viruses and coronaviruses (CoV). Although the search for viruses with pandemic potential in the environment may have an important predictive and monitoring role, it is still based on empirical methodologies, mostly resulting from the clinic and not fully validated for environmental matrices. As far as the SARS-CoV-2 pandemic, currently underway, is concerned, environmental monitoring activities aiming at checking the presence of SARS-CoV-2 in wastewater can be extremely useful to predict and check the diffusion of the disease. For this reason, the present study aims at evaluating the SARS-CoV-2 diffusion by means of a wastewater-based environmental monitoring developed in Piedmont, N-W Italy, during the second and third pandemic waves. Wastewater sampling strategies, sampling points sample pre-treatments and analytical methods, data processing and standardization, have been developed and discussed to give representative and reliable results. The following outcomes has been highlighted by the present study: i) a strong correlation between SARS-CoV-2 concentration in untreated wastewater and epidemic evolution in the considered areas can be observed as well as a predictive potential that could provide decision-makers with indications to implement effective policies, to mitigate the effects of the ongoing pandemic and to prepare response plans for future pandemics that could certainly arise in the decades to come; ii) moreover, the data at disposal from our monitoring campaign (almost 500 samples analysed in 11 months) confirm that SARS-CoV-2 concentrations in wastewater are strongly variable and site-specific across the region: the highest SARS-CoV-2 concentration values have been found in sewer networks serving the most populated areas of the region; iii) normalization of viral concentrations in wastewater through Pepper Mild Mottle Virus (a specific faecal marker) has been carried out and commented; iv) the study highlights the potential of wastewater treatment plants to degrade the genetic material referable to SARS-CoV-2 as well. In conclusion, the preliminary data reported in the present paper, although they need to be complemented by further studies considering also other geographical regions, are very promising.

SARS-CoV-2 airborne transmission: A validated sampling and analytical method.

The airborne transmission path for SARS-CoV-2 is of primary scientific and health-related interest as it could actually involve management, accessibility, use and functionality of many activities, including hospitals), schools, workplaces, factories, transport, sport venues and outdoor environment. It is necessary to develop a sampling and analytical method for virus-laden bioaerosol that could be considered reliable and validated according to ISO/IEC 17025 requirements. The present paper defines sample pretreatments aiming at recover SARS-CoV-2 from glass-fiber and PTFE filters employed by low and high-volume air samplers. Recovery test results focused on the sample concentration step carried out by means of ultracentrifugation are reported as well. Human coronavirus strain OC43 (a surrogate ß-coronavirus with the same SARS-CoV-2 particle structure) was used to validate each step of the recovery tests. We found that the elution efficiency of coronavirus OC43 from glass-fiber and quartz filters could be strongly enhanced by using an elution buffer containing up to 40% of fetal calf serum. Moreover, the recovery from PTFE filters is much higher and easier than from glass-fiber filters: for glass-fiber filters a 3 h-shaking phase, followed by a 30 s-vortexing step, are necessary to elute viral infective particles; for PTFE, 60 min-shaking is enough. The effect of suction time on filters could be resumed as follows: sampling durations up to 20 min at a flow rate of 500 L/min do not affect recovery efficiencies from 10 cm glass-fiber filters, whereas the recovery efficiency of infectious virions from 4.7 cm PTFE filters decreases of a factor 2 after 3 h of sampling at a flow rate of 20 L/min. The recovery efficiency of ultracentrifugation turns out to be around 57%. The effect of storage temperature of filters immersed in a transport medium on coronavirus infectivity is assessed as well. Based on the sampling techniques and the analytical methods developed as described in the present study, many field tests were carried out reporting virus concentrations up to 50 genomic copies per cubic meter of air in domestic environment with poor ventilation condition, whereas in hospital wards the detectable concentrations of SARS-CoV-2 were generally lower than 10 genomic copies per cubic meter of air.

SARS-CoV-2 and indoor/outdoor air samples: a methodological approach to have consistent and comparable results.

Since the beginning of coronavirus disease 2019 (COVID-19) pandemic, large attention has been focused on the relationship between SARS-CoV-2 diffusion and environment. As a matter of fact, clear evidence of the transmission of SARS-CoV-2 via respiratory aerosol would be of primary importance; at the same time, checking the presence of SARS-CoV-2 in wastewater can be extremely useful to control the diffusion of the disease. Up to now, many studies report SARS-CoV-2 concentrations in indoor/outdoor air samples or water/wastewater samples that can differ by order of magnitude. Unfortunately, complete information about the scientific approach of many studies is still missing, relating to: samplers and sampling materials performances, recovery tests, measurement uncertainty, robustness, detection and quantification limits, infectivity of captured virus, virus degradation during sampling, influence of sample pre-treatments (included freezing) on results, effects of inhibitors, sample alterations due to manipulation, validation of methods and processes, quality assurance according to ISO/IEC 17025 requirements. Based on the first experiences focused on the presence of SARS-CoV-2 in environmental samples such as air quality filters or impingers collection solutions, the present study describes a coherent preliminary approach to SARS-CoV-2 indoor and outdoor air sampling in order to overcome the evident lack of standardization. Three aspects are highlighted here: the first solution to assure quality and consistency to air sampling relies on the development of recovery tests using standard materials and investigating sampling materials, sampling techniques, sampling durations, sample conservation and pre-treatments; secondly, in order to overcome the shortcomings of every single sampling technique, coupling different samplers in parallel sampling could be an efficient strategy to collect more information and make data more reliable; finally, with regards to airborne virus sampling, the results could be confirmed by simplified emission and dilution models.